Q&A
-
2016-12-09 What should be noted for the safety protection of ...
In the GIS disassembly should pay attention to the following safety protection: 1, disassembly maintenance, maintenance personnel should wear special work clothes (protective clothing), hats, scarves. Gas mask or dust mask, using thin latex gloves or nylon gloves (not cotton yarn), goggles and special work shoes; 2, in and out of SF6 maintenance room, use the fan or compressed air to wash the whole body; 3. Wash hands frequently and the exposed part of the human body during work breaks, and pay
Learn More -
2016-12-09 GIS disassembly maintenance safety precautions are...
The following safety precautions should be taken when disintegrating GIS: 1, disassembling maintenance, maintenance personnel should wear special work clothes (protective clothing), hats, scarves. Gas mask or dust mask, using thin latex gloves or nylon gloves (not cotton yarn), goggles and special work shoes;
Learn More -
2016-12-09 Comparison of SF6 sensing detection principle
1, catalytic combustion technology: electrochemical principle Typical features: combustion, chemical reaction, detection of new substances. Principle: Through heating, pressurization (500-600℃, 700-800V) to decompose SF6 through the gas sensor, and through the detection of new easily detected substances to achieve SF6 concentration detection.
Learn More -
2016-12-05 What services are available in the SF6 industry?
Weavers offers a full range of 9 professional services within the SF6 industry: SF6 Professional leak detection service, SF6 density meter transformation service, SF6 density meter transformation service, SF6 recycling service, SF6 exhaust gas regeneration service, SF6 exhaust gas regeneration service, SF6 instrument rental service, SF6 leak detection calibration service, SF6 instrument spare parts service, Wevers Extended warranty service, service guarantee policy.
Learn More -
2016-12-04 Why install an SF6 micro water integrated monitor ... Learn More
-
2016-12-04 SF6 density relay measured a decrease in gas densi...
According to the power grid operation regulations, the 126-550Kv new equipment after the operation of micro-water measurement: 3-6 months measurement, if there is no abnormality, 1-2 years detection; After the 40.5-72.5kV equipment is put into operation, it will be reinspected once a year, if there is no abnormality, it will be measured once every 2-3 years.
Learn More