2016-11-28

The TOSA trolley bus, developed by ABB, not only completes a "flash charge" in 15 seconds, but also reduces 1,000 tons of carbon dioxide emissions per year. In addition, the world's first new GIS has been developed to replace sulfur hexafluoride with an environmentally friendly gas mixture, reducing CO2 equivalent emissions throughout the life cycle of the equipment by up to 50%.

2016-11-24

(1) The harm of SF6 gas. For a long time, due to the use and poor management of SF6 gas, many toxic, corrosive gases and solid decomposition are discharged into the atmosphere, causing irreparable pollution and damage to the environment we rely on for survival, and endangering the normal operation of electrical equipment and human health;

2016-11-22

The SF6 Portable Quantitative Leak detector (Winfoss-C2) is mainly used in the leakage detection of SF6 related products such as GIS and SF6 gas-insulated circuit breakers and SF6 inflatable ring cabinets in the power industry.

2016-11-20

Based on the concept of user customization, WINFOSS uses Michell's new relative humidity probe SF6 Dew point sensor to measure dew point, moisture content and micromoisture content. Ranging from extremely dry conditions (-120°Cdp) to high humidity conditions with dew points up to +60°C, the probe can be used in a variety of applications for reliable measurements.

2016-11-20

(1) Correct use of SF6 gas recovery equipment, strictly abide by the operating procedures, prepare carefully before starting, check repeatedly during starting, properly handle after stopping, adjust well during operation, carefully implement the operating indicators, and do not run over temperature and overpressure;

2016-11-20

(1) sulfur hexafluoride gas recovery device should be placed in a dry and pollution-free environment; (2) The sulfur hexafluoride gas recovery device is regularly energized to test the operating status of each equipment, and make relevant records; (3) Regularly check the oil level of the vacuum pump and record the operation time of the vacuum pump to master the maintenance time of the vacuum pump; (4) The used drying device and external pipeline should be strictly sealed to prevent the